欢迎光临济南九恒机械制造有限公司网站

右上角联系方式

热门关键词:自行式升降机升降机厂家

新闻动态 News class

联系我们 contact us

济南九恒机械制造有限公司

联系人:李经理

手机:15966606398

电话:0531-81170766

QQ:1366870197

邮箱:1366870197@qq.com

地址:济南市济阳县创业路北首

升降机资料 News

当前位置: 首页 > 新闻动态 > 升降机资料
导轨式升降机如何做轮胎检查?
  • 作者:本站 来源:本站 日期:2017-01-01 19:39:26 人气:77

  • 导轨式升降机如何做轮胎检查?

        检查导轨式升降机轮胎应是设备定期检查中的一部分,而且应该被列为主要的检查项目之一。

    检查导轨式升降机轮胎应是设备定期检查中的一部分,而且应该被列为主要的检查项目之一。如果平台任何部件出现故障或问题,那么必将导致设备停工,而计划外的任何设备停工都会带来损失。因为为避免此类意外发生定期检查导轨式升降机状况是非常重要的。Inspection guide rail lift tires should be a part of the equipment on a regular inspection, and should be listed as one of the main inspection items. If there is any component failure or problem, it will cause the equipment to be shut down, and the planned shutdown will bring the loss. Because it is very important to avoid this kind of accident, it is very important to regularly check the condition of the guide rail.

       在正式进行导轨式升降机轮胎检查前需要确认升降机是否处于未装载状态以及停下的安全状态。无论进行何种类型的检查只要需在平台周围工作那么最好确保其处于空载状态。如果一定要在负载的设备周围工作,尤其是当平台停止或者重新启动时必须站在远一点的安全区域内。It is necessary to confirm whether the elevator is in a state of not loading and to stop the safety condition before the inspection of the guide rail lift. No matter what type of inspection as long as the need to work around the platform so that it is best to ensure that it is in no state. If it is necessary to work around the load of the equipment, especially when the platform stops or restart must stand in a safe area.

    第一检查导轨式升降机轮胎胎侧并记下轮胎序号,检查气压,第二观察台面外观磨损是否均匀,并查找可能深达胎冠钢丝层的任何损坏,第三检查胎面花纹深度,量取胎面中心及内外数值检查轮胎内侧。The first check guide lifts the tire side and down tire pressure, check, table second to observe the appearance of the wear is uniform, and find any possible damage depth of crown wire layer, third check the tread depth, measured tread center and numerical check tire inside.

     对于损坏的导轨式升降机轮胎轻微损坏可以继续使用,对轮辋的检查需要检查其是否存在裂纹或严重损坏,以及轮辋螺母是否正确拧紧。液压升降机停止较长时间后,轮胎温度较低时进行检查。导轨式升降机轮胎尺寸越大停车所需的时间越长,如果测得的气压和标准压力相差超过10%,必须尽快予以纠正。Slight damage to the damaged rail lift tires can be continued, the inspection of the rim needs to be checked for the presence of cracks or serious damage, as well as the correct tightening of the rim nut. After the hydraulic lift stops for a long time, the tire temperature is lower. The longer the size of the rail lift, the longer the size of the car, if the measured pressure and standard pressure difference of more than 10%, must be corrected as soon as possible.


    本文网址:http://www.jnsjpt.net/jishuziliao/49.html

  •      最新资讯

关于我们 | 新闻动态 | 产品中心 | 生产案例 | 常见问题 | 荣誉资质 | 联系方式

版权所有: 济南九恒机械制造有限公司     seo技术支持:qq415762134       网站地图

在线咨询